Technical Specifications - M-Audio PULSAR II Guide D'utilisation

Technical Specifications

Type
Polar Pattern
Frequency Response
Sensitivity
Max. SPL (<0.5% threshold level)
Equivalent Noise Level
Output Impedance
Suggested Mic Pre Input Impedance
Preamp Topology
Power Requirement
Connector
Dimensions
Weight
Frequency response
representation for the
Pulsar II microphone:
Polar response representation for the Pulsar II
microphone:
Specifications are subject to change without notice.
Small diaphragm condenser
Cardioid
20 Hz – 20 kHz
13.8 mV/Pa (-37 dBV ref. 1 V/Pa)
134 dB; 144 dB SPL with -10 dB pad
15 dB A-weighted
300 – 600 Ω
1 – 2.5 kΩ
Class A FET, transformerless
30 VDC – 50 VDC phantom power
3-pin male XLR
22 mm (0.87") diameter, 132 mm (5.20") long
115 g (4.0 oz)
6