Technical Specifications - M-Audio Nova Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Cardioid Pattern
Cardioid is the most universal microphone polar pattern. This is because the back of the
microphone rejects sound, allowing the engineer to isolate the signal source from other
performance elements or background noise. The logo side of the microphone is the "live" side.
Care of Your Microphone
Here are a few tips for the care of your Nova microphone:
• Never subject the Nova to physical shock.
• Always use a mic stand and use the included hard mount when securing it to a stand.
• Always wipe the Nova's exterior with a soft dry cloth and return it to its case after each use
to prevent damage caused by dust.
• If your Nova needs more extensive cleaning, lightly dampen a soft cloth with water or mild
household soap and clean the metal exterior, wiping it completely dry when finished.
Never spray a cleaning agent on the Nova itself, as excessive moisture can damage the
unit.
• Avoid subjecting the Nova to any kind of moisture. In vocal applications, use a windscreen
to protect the diaphragm from the build-up of breath condensation and saliva.
• Never disassemble the Nova. There are no user-serviceable parts inside.
• Use high-quality cables to avoid short circuits that may damage the microphone's
electronics.
• Avoid temperature extremes above 95°F and below 50°F. To avoid harmful condensation
on the diaphragm when moving between indoor and outdoor environments, allow the
Nova to acclimate to room (air) temperature before connection.

Technical Specifications

Type
Polar Pattern
Frequency Response
Sensitivity
Max. SPL for 0.5% THD
Equivalent Noise Level
Output Impedance
Recommended Load impedance
Preamp Topology
Power Requirement
Connector
Grille and Body
Finish
Dimensions
Weight
* Specifications subject to change without notice.
Large-diaphragm condenser, gold evaporated
Cardioid
20 Hz – 18 kHz
16 mV/Pa (-36 dBV)
128 dB
14 dB (A-weighted)
200 Ω
>1000 Ω
Class-A FET
+48 V phantom power
3-pin male XLR
Wire mesh grille, solid brass body
Silver nickel plating
1.9" (52 mm) diameter, 7.3" (185 mm) long
23 oz. (650 g)
3

Publicité

Table des Matières
loading

Table des Matières