Dell Precision T5400 Guide De Référence Rapide page 19

6 USB 2.0 connectors (2) Use the front USB connectors for devices that you
7 Dell rotatable badge
8 power button,
power light
9 headphone connector
10 microphone connector Use the microphone connector to attach a personal
11 network link light
12 diagnostic lights (4)
connect occasionally, such as flash memory keys or
cameras, or for bootable USB devices (see "System
Setup" in your User's Guide for more information on
booting to a USB device).
Dell recommends that you use the back USB connectors for
devices that typically remain connected, such as printers
and keyboards.
To rotate the Dell badge for tower-to-desktop conversion:
remove the front panel ("Removing the Computer Cover"
in your User's Guide), turn it over, and rotate the plastic
handle behind the badge.
Press the power button to turn on the computer. The light in
the center of this button indicates power state. See "Controls
and Lights" in your User's Guide for more information.
NOTICE:
To avoid losing data, do not use the power
button to turn off the computer. Instead, perform an
operating system shutdown.
Use the headphone connector to attach headphones.
computer microphone for voice or musical input into
a sound or telephony program.
The network link light is on when a good connection
exists between a 10-Mbps, 100-Mbps, or 1000-Mbps
(or 1-Gbps) network and the computer.
Use these lights to help you troubleshoot a computer
problem based on the diagnostic code. For more information,
see "Power Lights" on page 27.
Quick Reference Guide
19