Publicité
Les langues disponibles
Les langues disponibles
Connect the connectors for the remote control and for the 12-volt connec-
tion to the road book and use the four M5 oval head screws and washers to
screw the road book through the four rubber elements to the motherboard
included in the scope of supply.
7
Now mount the original trip master in the original rubber elements and
reconnect.
Fix all cables with cable clips, reinsert the fuses and check the road book
holder, the remote control and the socket for proper functioning. The road
book holder should only operate when the ignition is switched on, the
socket should also function when the ignition is switched off.
Mount the headlight, side covers and windshield again. Connect the
connectors for the turn signal. Check the steering for free movement.
WARNING
A
LWAYS STOP THE MOTORCYCLE TO OPERATE THE ROAD BOOK REMOTE CONTROL OR
. I
,
TO READ THE INFORMATION IN THE ROAD BOOK ITSELF
F YOU DO THIS WHILE DRIVING
YOUR ATTENTION WILL BE DISTRACTED FROM THE TRAFFIC AND IT MAY CAUSE YOU TO
.
HAVE AN ACCIDENT
Publicité
