Publicité
Les langues disponibles
Les langues disponibles
12
1. Red pilot light (power)
2. Green pilot light (heating)
3. Cover
4. Handle
5. Hook
6. Releasing buttons
7. Ceramic interchangeable plates
8. Heating plates for sandwiches
9. Heating plates for waffles
10. Heating plates for grilling
ASSEMBLING AND DISASSEMBLING OF HEATING PLATES
Removing:
1. Open the cover of the sandwich maker.
2. Pull the releasing buttons to release upper and lower plates and remove
them.
Inserting:
EN
1. Place the selected plate in the upper and lower casing and press them
toward corresponding cases until they click in place. Make sure the heat-
ing plates are installed correctly.
Warning! Before removing or inserting heating plates make sure the device
has cooled down after operating. Never replace the plates when the device
is still hot.
1. Remove the device from the packaging and peel off any labels.
2. Place the device on dry and flat surface.
3. Make sure the power supply socket is nearby.
4. Open the cover and apply a layer of vegetable oil or butter on the plates
using kitchen towel or brush for dough.
5. If necessary wipe off any excess oil.
6. Close the cover and insert the plug into supply socket. Red and green
indicators turn on.
7. Wait until green light goes off; it means that heating plates reached the
toasting temperature. Sandwich maker is now ready to be used.
OPERATION
Owner's manual
Publicité
