Ibiza Light PAR56 Manuel D'utilisation page 3

General instructions
Before plugging this unit to power make sure the voltage in your area matches
the required voltage for the LED PAR-56 Pro. All PAR-LED PRO units can be
powered by 90/260V and 50/60Hz.
There are 2 ways to control your PROFESSIONAL LED PAR-56. The first
option is by 'stand alone' function, and probably the most used option by an
external controller via DMX. The order in which fixtures are connected in a
DMX line does not influence the DMX addressing, the controller always will
recognize the fixture by its address.
XLR Wiring
Menu Control Panel
© Copyright Lotronic 2011
All manuals and user guides at all-guides.com
XLR Pin Configuration
Pin 1 = Ground
Pin 2 = Data Compliment (negative)
Pin 3 = Data True (positive
DMX values and Functions:
CHANNEL FUNCTION
1 RGB dimmer
2 Red dimmer
3 Green dimmer
4 Blue dimmer
5 Strobe
6 Function
7 Speed
Specifications
 Operating modes: DMX512, Master/Slave, Auto, Sound activated
 Functions: Color changer (fast or slow), strobe & dimmer
 Lamp: 24x 1W hi bright LEDs
 Life time of the lamps:80-100.000 operating hours
 Colors:16.7 millions
 Consumption:24W
 Power supply: 90V-250Vac/50-60Hz
 Dimensions: L240 x W200 x H280mm
IMPORTANT NOTE: Electric products must not be put into household
waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed
VOLUME REMARK
0 – 255 RGB OFF – All ON
0 – 255 Red 0% - 100%
0 – 255 Green 0% - 100%
0 – 255 Blue 0% - 100%
0 – 255 Strobe from slow to fast
0 – 24 RGB dimmer
25 - 126 Auto
127 - 128 Red & blue
129 - 249 Sound activated
250 - 255 All ON
0 – 255 Speed from fast to slow
.
3