Warranty And Support; Recycling; Technical Specifications - Philips Lumea Guide De L'utilisateur

28
English
Problem
The results of the
treatment are not
satisfactory.

Warranty and support

Recycling

Technical specifications

Adapter input
Adapter output
Emitted wavelengths
Pulse duration
Repetition time
Optical exposure
Possible cause
You have used a light
intensity setting which is too
low for you.
You did not flash an area
adjacent to an area you
treated before.
The device is not effective on
your body hair color.
You do not use the device as
often as recommended.
You respond more slowly to
IPL treatment.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
- This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
100 V - 240 V ~50/ 60 Hz 1000 mA
24.0 V 1500 mA
530 nm - 1400 nm
<1.5 ms
1-3.5 s, depending on chosen setting
Body attachment: 2.5 – 5.0 J/cm2
Bikini attachment: 2.5 – 5.0 J/cm2
Face attachment: 2.5 – 4.5 J/cm2
Solution
Select a higher setting next time.
You have to release the flashes close to,
but not overlapping, the previous spot.
If you have light blond, grey, red or white
hair, the treatment is not effective.
To remove all hairs successfully, we
advise you to follow the recommended
treatment schedule. You can reduce the
time between treatments, but do not
treat more often than once every two
weeks.
Continue using the device for at least 6
months, as hair regrowth can still
decrease over the course of this period.