E
CONO COOL OPERATION
Press
during COOL mode
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according to the
temperature of the unit. Set temperature is set 2°C higher automatically.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation also is canceled when the VANE button is
pressed.
What is "ECONO COOL"?
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow. So,
even though the set temperature is automatically set 2°C higher, it is possible to
perform cooling operation with keeping comfort. As a result, energy can be saved.
T
IMER OPERATION (ON/OFF TIMER)
1
Press
or
during operation to set the timer.
(ON timer) :
The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time is set correctly.
2
Press
(Increase) and
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
or
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together.
operations.
• If power failure occurs while ON/OFF timer is set, see
function".
page 4
to start
Page 3
(Decrease) to set the
is blinking.
mark indicates the order of timer
page 4
"Auto restart
En-6