baltur Gl 1000 LX Mode D'emploi page 43

NOTE: The screw at terminal board "4" adjusts the
position for the "clean" contact intervention,
usable for any external signalling.
V Control signal input
N Neutral
IV Screw for auxiliary contact "IV"
commutation point adjustment
INSTRUCTIONS FOR ADJUSTMENT OF GAS
VALVE MODEL SKP 70 ...
pG outlet gas pressure
pA Air pressure
pC Pressure in the combustion chamber
pE Gas pressure in valve inlet
EXECUTION WITH AUXILIARY CONTACT
41
BT 8883
REV.: 06/11/1990