Table Des Matières; Safety Information - IKEA FRAMTID FCF245/126 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Contents
Safety Information
Before first use
This appliance is intended to be used in
household.
To ensure best use of your appliance,
carefully read this User Manual which
contains a description of the product and
useful advice.
Keep these instructions for future reference.
1. After unpacking the appliance, make
sure it is not damaged and that the door
closes properly. Any functional fault must
be reported to IKEA After Sales Service
as soon as possible.
2. Wait at least two hours before switching
the appliance on, to ensure that the
refrigerant circuit is fully efficient.
3. The electrical installation and the
electrical connection must be carried
out by a qualified technician according
to the manufacturer's instructions and
in compliance with the local safety
regulations.
4. Clean the inside of the appliance before
using it.
Precautions and general recommendations
Installation and connection
The appliance must be handled and
installed by two or more persons.
Be careful not to damage the floors (e.g.
parquet) when moving the appliance.
During installation, make sure the
appliance does not damage the power
cable.
Make sure the appliance is not near a
heat source.
To guarantee adequate ventilation,
leave a space on both sides and above
4
6
7
7
8
the appliance and follow the installation
instructions.
Keep the appliance ventilation openings
free.
Do not damage the appliance
refrigerant circuit pipes.
Install and level the appliance on a floor
strong enough to take its weight and in a
place suitable for its size and use.
Install the appliance in a dry and
well-ventilated place. The appliance
is arranged for operation in places
where the temperature comes within
the following ranges, according to the
climatic class given on the rating plate.
The appliance may not work properly if
it is left for a long time at a temperature
outside the specified range.
Make sure the voltage specified on the
rating plate corresponds to that of your
home.
Climatic Class
SN
N
ST
T
Do not use single/multi adapters or
extension cords.
Amb. T. (°C)
Amb. T. (°F)
From 10 to 32
From 50 to 90
From 16 to 32 From 61 to 90
From 16 to 38 From 61 to100
From 16 to 43
From 61 to 1 10
4
10
12
13
14

Publicité

Table des Matières
loading

Table des Matières