Hapro Luxura X5 Mode D'emploi page 7

Coin-operated mode without remote start
The machine will be started automatically if there is no 'remote start' present on the external
timer or coin unit. The 'remote start' can be con gured by your dealer.
Coin-operated mode with remote start
Press 1x to start the machine.
Stand-alone mode
Press 1x.
The maximum tanning time (start time) is shown on the display. The tanning time can be
changed with the and buttons.
Press 1x to con rm the set time. The machine is switched on and the tanning time
begins.
After setting the tanning time, hold
button is pressed for 1 minute, the machine will return to the standby screen automatically.
Pause mode
Press 1x during tanning to put the machine in pause mode. The lamps are switched o .
The body cooling remains on (maximum 4 minutes). Xsens (optional) and Qsens (optional)
are paused.
Coin-operated mode
The remaining tanning time continues to be shown at the top of the display and 'Press
restart' appears at the bottom.
Press 1x during pause mode to restart the sunbed.
Stand-alone mode
The remaining tanning time continues to be shown at the top of the display and 'Press
restart' and 'Hold button 3 seconds to end the session' appear alternatingly at the bottom.
Press 1x during pause mode to restart the sunbed or hold
o the sunbed. This ends the tanning session, and the required 3 minute cool down period
begins.
Note:
The tanning time counter keeps running during 'pause mode' .
If the sunbed is restarted within 4 minutes after
do not go on. The facial tanners restart automatically after the required 4 minute cool down
period.
If the button is pressed, the air conditioning (optional) will continue running for 5
minutes before it switches o . After these 5 minutes, the air conditioning also has a required
3 minute cool down period.
for 3 seconds to return to the standby screen. If no
for 3 seconds to switch
is pressed, the facial tanners (SLi only)
15:00
Set time
08:19
Pause
to
Press
to
to continue
7