Initial Start-Up; Use; Correct Battery Type; Charging - Delo AGM BATTERY Mode D'emploi

4 | Initial start-up

Check the battery and the scope of delivery.
1. Remove the battery and accessories from the packaging.
2. Check whether the delivery is complete (see Section 1).
3. Check whether the battery or the individual parts are damaged.
Contact the manufacturer via the specified service address if
they are.

5 | Use

5.1 | Correct battery type

Always ensure that the battery you are installing is the correct type
for your vehicle, and is recommended for your model by the vehicle
manufacturer. You can generally do this by looking in your vehicle
handbook or by checking the designation on your old battery (e.g.
YTZ10S).
Prior to commissioning the battery, always check the following:
1. Does the battery fit your vehicle? Are the dimensions correct
(height x width x depth)?
2. Are the positive and negative terminals in the right position?
3. Does the battery have the correct voltage (V = volt)?
4. Does the battery have the correct capacity (Ah = ampere-hours)?

5.2 | Charging

IMPORTANT!
Risk of damage!
In spite of being factory pre-charged, the battery
must always be 100% fully charged prior to
installation. This must be carried out using
a suitable motorcycle charger. Failure to do
so will shorten the service life of your battery
considerably and may damage the battery.
26