Publicité
User Manual
Introduction
Thank you for purchasing the LINDY 2, 4 or 8 Port HDMI 4K Splitter. This device is a high
performance HDMI amplifier and video & audio splitter which allows one HDMI source to be
displayed simultaneously on 2, 4 or 8 different displays (depending on model.)
Package Contents
• LINDY HDMI 4K Splitter
• 5V DC multi country power supply
Features
• HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
• Full 4K 3D support
• Supports HDTV resolutions up to 1080p @ 60Hz & 4K x 2K @ 30Hz
• The splitters support LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
• Built in EDID simulator and HDCP keyset allows each output to work independently when
connecting to an HDMI display
• Supports both DVI-D source and display devices when using DVI-D/HDMI adapter
cables
• Cascadable – up to 3 splitters can be connected together for more displays
• Each input/output can support up to 10 metres
• 12 bit deep colour
• Up to 300Mhz bandwidth
Operation
Make sure all devices are switched off before making any connections! Once all the
connections have been made, switch on the devices in this order: displays, HDMI Splitter,
source device.
Connect the source device such as a DVD player or games console to the HDMI splitter's input
port. Then connect the high definition displays to the HDMI splitter's output ports. When all the
connections are made, connect the power supply and switch on.
Notes on using DVI-D equipped devices: To connect devices equipped with DVI-D
connections, you can use either modular DVI-D/HDMI adapters or DVI-D/HDMI adapter
cables. Be aware that DVI-D is a 'video only' interface; audio signals are not supported
when using DVI-D source devices. Also, please note that DVI-D equipped displays must
support HDCP signal decoding to display HDCP protected HDMI signals. HDCP
compatible displays will normally feature the HD Ready logo.
English
Publicité
