BoomToneDJ EZ-BOX 4x15W Mode D'emploi page 14

REMOTE :
(1)Black Out
(2)Auto
(3) Sound
(4) Strobe
(5) Fade/JUMP
(6) Sound sensitivity adjust the sensitivity of the mic
(7) R Red dimmer in the dimming mode
(8) G Green dimmer in the dimming mode
(9) B Blue dimmer in the dimming mode
(10) A/UV N/A
(11) W White dimmer in the dimming mode
(12) + Increase parameter (include strobe speed adjust,sound sensitivity
adjust,color select,adjust the brightness of R,G,B,W Gradual change speed
adjust,jump change speed adjust).
(13) －
adjust,color select,adjust the brightness of R,G,B,W Gradual change speed
adjust,jump change speed adjust).
(14) 0 Function switch(Dimming mode and monochromatic mode)
Using universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU, then find Addr ,press ENTER,when the 1 is showing on the display. Pressing
ENTER. Use DOWN and UP button change the DMX512 address.
Turn on /off
Auto show
Sound active
Strobe Mode
Gradual change mode/Jump change mode switch
Reduce parameter (include strobe speed adjust,sound sensitivity
2.Slow Speed
3.
Middle Speed
4.Fast Speed
Restore factory
8888
MANUAL
6666
Temperature
ON/OFF
Battery
ON/OFF
BackGrounColor
0-8
14