Installing Updates For The Home Connect Software; Information On Data Protection; Declaration Of Conformity - Siemens KI S Serie Notice D'utilisation

en Home Connect
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connectsoftware.
If an update is available, the refrigerator
compartment temperature display
shows UP.
Pressing any button will reset the
display to the set temperature.
Installing the update:
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button +/- refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows UP and the freezer
compartment temperature display
shows OF.
Press button +/- freezer
3.
compartment.
The freezer compartment
temperature display shows an
animation.
The update will be installed.
During the installation, all buttons are
locked.
If the installation was successfully
–
completed, the freezer
compartment temperature display
will show On.
If the installation was not
–
successfully completed, the
freezer compartment temperature
display will show Er.
Start the update again at a later
time.
Inform the Customer Service if
the installation has still not been
successfully completed after
several attempts.
42

Information on data protection

The first time your Home Connect
appliance is registered on the WLAN
network connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure IT connection).
The current software and hardware
■
version of your domestic appliance.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connectfunctions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Be aware that the Home Connect
Note:
functions can only be utilised with the
Home Connect app. Information on data
protection can be called up in the Home
Connectapp.

Declaration of conformity

BSH Hausgeräte GmbH hereby
declares that the appliance with Home
Connect functionality conforms to the
basic requirements and other relevant
provisions of the directive 1999/5/EC.
A comprehensive R&TTE declaration of
conformity can be found on the Internet
under www.siemens-home.bsh-
group.com on the product page of
your appliance in the additional
documents.