Siemens KI S Serie Notice D'utilisation page 41

Connecting the refrigerator with the
app
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button +/- refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows PA and the freezer
compartment temperature display
shows OF.
Press the button +/- freezer
3.
compartment to connect the
appliance with the app.
The freezer compartment
temperature display shows an
animation.
As soon as the refrigerator and the
app are connected, the freezer
compartment temperature display
shows On.
Wait until the refrigerator is displayed
4.
in the Home Connect app on the
mobile device. Then select + (add).
If the refrigerator is not automatically
displayed, first select Search for
domestic appliances and then
Connect domestic appliance in the
Home Connect app.
Follow the instructions in the app
5.
until the process is complete.
Refrigerator compartment
temperature display shows PA and
freezer compartment temperature
display shows On.
The refrigerator is successfully
connected with the app.
If the connection fails, check whether
the mobile device is connected to
the home network (WLAN).
Then try to establish the connection
again.
If Er appears in the freezer
compartment temperature display,
reset the Home Connectsettings.
When resetting, all the Home
Note:
Connect settings are reset.
Verify signal strength
You should verify the signal strength if
no connection can be established.
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button +/- refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows SI. In the freezer
compartment temperature display a
value appears between 0 (no signal)
and 3 (full signal).
The signal strength should be at
least 2. If the signal strength is too
weak, the connection may be
interrupted.
Place the router and refrigerator
–
closer together.
Ensure that the connection is not
–
interfered with by screening walls.
Alternatively, install a repeater to
–
make the signal stronger.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connectsettings can be reset:
Press the | button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button +/- refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows rE and the freezer
compartment temperature display
shows OF.
Press button +/- freezer
3.
compartment.
Freezer compartment temperature
display shows an animation for 15
seconds.
Then the freezer compartment
temperature display shows OF.
The Home Connect settings have
been reset.
Home Connect en
41