Display; Display Light; Sleep Mode - Velux VSE KLR 100 Notice D'utilisation

Display

Display light

In standard settings, the light in the display is turned on
when the keypad is activated and turned off again after
20 seconds. If you do not want any light in the display and
you want to prolong the battery lifetime, you can opt out
of this.
The example shows how to turn off the light in the display.
1
Press "Menu".
2
Scroll through the menus:
user settings
3
Press to highlight "Display light".
Press "Enter" to confirm your choice.
4
Press to highlight "Off".
Press "Enter" to confirm your choice.
Note: The light in the display can be turned on by choosing
"On" in item 4.
46 VELUX
Menu
P1
display
display light

sleep mode

Enter
P1
disPlay ligHt
on
off
Enter
P1
ENGLISH
Sleep mode
The life of the batteries can be prolonged by setting the
remote control to go into sleep mode. When it has been
set to go into sleep mode, the light in the display will be
turned off 20 seconds after the latest key pressure. Time
is shown.
House
Press any key to activate the remote control again. How-
No. 1
ever, the stop key
Window
The example shows how to set the remote control to go
Locate
into sleep mode.
P2
1
Press
2
disPlay Scroll through the menus:
user settings
Back
3
Press
P2
Press
Back
4
Press
Press
P2
5
When the remote control is in sleep mode, time is shown.
Note: Choose "Off" in item 4 if you do not want the
remote control to go into sleep mode.
can be used at any time.
"Menu".
display
to highlight "Sleep mode".
"Enter" to confirm your choice.
to highlight "On".
"Enter" to confirm your choice.
ENGLISH
House
No. 1
Window
Menu Locate
disPlay
display light
sleep mode
Enter Back
P1 P2
slEEP modE
on
off
Enter Back
P1 P2
03:43 am
VELUX 47