Publicité
Les langues disponibles
Les langues disponibles
EU DECLARATION OF CONFORMITY
The manufacturer or his authorized representative established in the Community:
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
Declares that the new PPE described hereafter:
PPE
Welding helmet set
Welding helmet:
MigADC Plus
ADFs:
MigADC Plus ADF
Protection lenses: PC outer lens 147 x 125 mm, PC inner lens 107,5 x 71,5 mm
PAPR:
CleanAIR Basic EVO, CleanAIR Chemical 2F Plus, CleanAIR Chemical 3F
Plus, CleanAIR Pressure Flow Master
Is in conformity with the relevant Union harmonization legislation: Regulation (EU)
2016/425 of the European parliament of the council, Directive 2001/95/EG and the har-
monized standards: EN 175:1997-08 (welding helmet); EN 379:2003+A1:2009 (ADF);
EN 166:2002-04 (protection lens); EN 12941:1998/A2:2008, EN 14594:2005 (PAPR)
is identical to the PPE which is the subject of EC Type Examination Certificate number:
C4922MG/R2
MigADC Plus
C1704.2MG
MigADC Plus ADF
C3871JP/R6
PC 147x125 mm, PC 107,5x71,5 mm Issued by DIN Certco GmbH
1024/E-070/2019 MigADC Plus AIR with:
CleanAIR Basic EVO,
CleanAIR Chemical 2F Plus,
CleanAIR Chemical 3F Plus,
CleanAIR Pressure Flow Master
The PPE is subject to the conformity assessment procedure: Conformity to type based
on quality assurance of the production process (Module C2, D) under surveillance of the:
Notified bodies:
Module B:
Notified body 1883, ECS (European Certification Service) GmbH, Hüttfeldstraße 50,
D-73430 Aalen, Germany.
Notified body 0196, DIN CERTCO Gesellschaft fuer Konformitaetsbewertung
mbH, Alboinstrasse 56, D-12103 Berlin, Germany.
Module B, C2:
Notified body 1024, Occupational Safety Research Institute, v.v.i., Jeruzalémská
1283/9, 110 00 Prague 1, Czech Republic.
Module D:
Notified body 0194, INSPEC International Ltd, 56 Leslie Hough Way, Salford, Gt
Manchester, M6 6AJ, UK.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Signed for and on behalf of:
MIGATRONIC A/S
Niels Jørn Jacobsen
CEO
Fjerritslev, 6.1.2020
Issued by DIN Certco GmbH
Issued by ECS GmbH
Issued by Occupational Safety
Research Institute, v.v.i.
11
Publicité
