Bosch GWS Professional 18V-15 C Notice Originale page 23

plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
With the Bluetooth® Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth® wire-
less technology.
Technical Data
Angle grinder
Article number
Rated voltage
A)
Rated speed
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Spindle lock button
(4) User interface
(5) On/off switch
(6) Cover for GCY 42 Bluetooth® Low Energy Module
®
, a
(7) Rechargeable battery
(8) Battery release button
(9) Auxiliary handle (insulated gripping surface)
(10) Extraction guard for grinding
®
in the vicinity of
(11) Mounting flange with O‑ring
(12) Carbide grinding head
(13) Quick-clamping nut with bar
(14) Protective guard for grinding
(15) Grinding disc
(16) Protective guard for cutting
(17) Cutting disc
(18) Handle (insulated gripping surface)
(19) Grinding spindle
(20) Hand guard
(21) Rubber sanding pad
(22) Abrasive disc
(23) Round nut
(24) Cup brush
(25) Diamond core bit
(26) Extraction guard for cutting with cutting guides
(27) Diamond cutting disc
(28) Battery charge indicator (user interface)
(29) Kickback shutdown indicator (user interface)
(30) Speed preselection button (user interface)
(31) Speed setting/mode indicator (user interface)
(32) Smartphone indicator (user interface)
(33) Power tool status indicator (user interface)
(34) Temperature indicator (user interface)
(35) Flap disc
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 18V-15 C
3 601 JH6 0..
V= 18
-1
min 11,000
English | 23
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWS 18V-15 SC GWS 18V-15 SC
3 601 JH6 1.. 3 601 JH6 3..
18
11,000
1 609 92A 6PM | (16.06.2021)
a)
18
8500