Functional Description; Technical Data - oventrop BWM-C F Notice D'utilisation

"BWM-C F"
3.2
3.3

Functional description

The infrared sensor of the wireless movement sensor "BWM-C F" detects
any movement in the room and the information is transmitted to the
corresponding receiver (e.g. DDC or gateway) via radiogram. A two minute
blocking time starts after transmission of the first movement information.
No movement information is transmitted during the blocking time. If no
movement is detected by the infrared sensor, a "non-occupied" message is
transmitted after 10 minutes and a second one after another 30 minutes.
3.4

Technical data

Power supply
Radio range
Movement detection range
Charging time battery less
operation
Charging time until full charge
Operating time in darkness
Min. level of illumination
EnOcean profile
RF communication
Dimensions
Weight
Installation height
Ambient temperature
Relative humidity of air
Particles
Mechanical influences
115328080-V02.08.2018
Technical description
Solar cells
Optional:
• Additional battery (CR2032)
• 2-wire connection for external
power supply (3-5 VDC)
about 25 m
5 m radius
3 hours per day with 200 Lux
25 hours with 200 Lux
80 hours (after full charging)
50 Lux
A5-07-01 (EEP)
EnOcean 868.3 MHz
160 mm x 60 mm x 37 mm
125 g
2 - 3 m
-10°C up to +40°C
min. 20% up to a max. of 95%
Dry and free from dust
Protected from mechanical agitation
EN
23