General Information; Validity Of The Operating Instructions; Type Plate; Extent Of Supply - oventrop BWM-C F Notice D'utilisation

"BWM-C F"
1.

General information

The original operating instructions were drafted in German.
The operating instructions in other languages were translated from German.
1.1

Validity of the operating instructions

These operating instructions are valid for the wireless movement sensor
"BWM-C F".
1.2

Type plate

The type plate is on the back of the movement sensor "BWM-C F".
1.3

Extent of supply

Please check the delivery for any damages caused during transit and for
completeness.
The extent of supply described in these operating instructions includes:
• "BWM-C F" Wireless receiver
• 2 screws
• 2 dowels
• 1 wire bracket (alternative fixing option for suspended ceilings)
1.4

Contact

Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
1.5

Copyright and protective rights

These operating instructions are copyrighted. They are exclusively designed
for persons involved with the product.
1.6

Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that this product complies with
the basic requirements and the other relevant provisions of the EC Directives
concerned.
The declaration of conformity can be obtained from the manufacturer.
115328080-V02.08.2018
General information
EN
19