Hilti WSR 900-PE Mode D'emploi page 22

3.4 Items supplied
Reciprocating saw, saw blade, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Reciprocating saw
For rated voltage, frequency, current and input power, please refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Weight according to EPTA Procedure-01 3.6 kg
Stroke rate
Stroke length
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L )
WA
Uncertainty for the sound power level
(K )
WA
Sound pressure level (L
Uncertainty for the sound pressure level
(K )
pA
Vibration information
Vibration emission value for cutting
board (a )
h, B
Vibration emission value for cutting
wooden beam (a )
h, WB
Uncertainty (wooden beams) (K)
Uncertainty (cutting board) (K)
16 English
Printed: 23.07.2019 | Doc-Nr: PUB / 5138031 / 000 / 03
WSR 900-PE
0 /min ...
2,700 /min
32 mm
WSR 900-PE
99 dB(A)
5 dB(A)
) 88 dB(A)
pA
5 dB(A)
WSR 900-PE
15.7 m/s²
22.8 m/s²
2.8 m/s²
1.5 m/s²
WSR 1250-PE WSR 1400-PE
4.5 kg 4.8 kg
0 /min ... 0 /min ...
2,700 /min 2,700 /min
32 mm 32 mm
WSR 1250-PE WSR 1400-PE
98 dB(A) 99 dB(A)
5 dB(A) 5 dB(A)
87 dB(A) 88 dB(A)
5 dB(A) 5 dB(A)
WSR 1250-PE WSR 1400-PE
21.5 m/s² 19.6 m/s²
26.2 m/s² 28.6 m/s²
3.7 m/s² 1.5 m/s²
1.5 m/s² 2.0 m/s²
378282
*378282*