Nice OXILR Mode D'emploi page 2

1
PRODUCT DESCRIPTION
OXILR is a radio receiver designed for being installed on a control unit for automating gates, garage doors and
road barriers.
– All uses other than the intended use described and use in environmental conditions other than
those described in this manual should be considered improper and forbidden!
• Long-range two-way radio communication
The OXILR receiver is equipped with two-way radio technology guaranteeing "Long Range" radio communica-
tion and interfaces with two-way transmitters that adopt the "LR" two-way radio encoding system.
OXILR can both receive and transmit information from and to the transmitter and, in particular, includes the
following functions:
– the sending of the confirmation (to the transmitter) that the transmitted command was received correctly;
– the sending of the status (to the transmitter) of the automation (for example, whether the gate is open or
closed, or any anomalies present).
• Other product characteristics
– The receiver is compatible with the "LR" two-way encoding system.
– The control unit's receiver has 1024 memory locations to memorise transmitters: one location can alterna-
tively memorise a single transmitter (if its keys are memorised as a "single set", with the Mode 1 procedures
– read Paragraph 3.1), or a single key (if memorised with the Mode 2 procedures – read Paragraph 3.2).
– Each receiver has its own identification number, known as the "Certificate". This allows for accessing several
1 - English
ENGLISH
Instructions translated from Italian