Publicité
Les langues disponibles
Les langues disponibles
3.5 - Deleting a SINGLE transmitter or a SINGLE key from the receiver memory
PROCEDURE 6 - Deleting a SINGLE transmitter or a SINGLE key from the receiver memory
01.
On the receiver: hold down key A, observe the green
LED B light up and move to step 02 when it switches
off.
02.
On the transmitter to be deleted:
(on the transmitter) press and release the key to be
deleted (*4): LED B (on the receiver) will emit 5 quick
green flashes (= deletion completed correctly).
(*4) Note - If the transmitter is memorised in "Mode 1", any key can be pressed. If the transmitter is memo-
rised in "Mode 2", the entire procedure must be repeated for each memorised key that must be deleted.
This operation can also be performed through the O-Box / O-View programmers.
4
OTHER FUNCTIONS
4.1 - Blocking access (through password) to the receiver programming
This function activates in the receiver (with the O-Box programmer) a password consisting of maximum 10
characters, chosen by the installer. The function allows for protecting all the settings already effected in the
receiver; moreover, it also prevents any subsequent settings through key A of the receiver (Fig. 1) or through
the O-Box and O-View programmers, if the password is not known.
11 - English
Publicité
