emitor Satlook Micro G2 Manuel D'utilisation page 5

The Menu Knob is used for Frequency adjustment when in the Digital mode or the
Spectrum mode. When the Menu Knob is turned slowly, the frequency is changed by
1MHz, but if rotated rapidly, the frequency step is increased allowing for quick
movement to the correct frequency.
Charging
Before using the Satlook G2 / HD, it should be fully charged.
To charge the instrument, connect the external power supply or 12V Car Cigarette
Lighter Plug and then plug the external power supply into the DC Input connector. The
charging process will begin and the blue LED lights will cycle indicating charging. The
charging mode and time of charging are displayed on the screen.
A full charge can take up to 14 hours, but depending on the battery state can be
completed sooner. When charging is complete, the bottom LED will be lit indicating
that the charging is complete. The Satlook G2 / HD can be operated using the external
power supply, but when the instrument is on, no charging is being performed.
The battery state is indicated on the Analog screen by a battery symbol.
5