Spectrum Mode - emitor Satlook Micro G2 Manuel D'utilisation

Spectrum Mode

G2 Spectrum
HD Spectrum
About Spectrum Mode
The Spectrum Mode shows the signal power versus frequency around the current
frequency. On entry to the Spectrum Mode, the spectrum cursor is in the centre of the
display and the centre frequency is set to the last used frequency. Turning the knob
changes the cursor frequency, and the flag shows the current cursor frequency and for a
Universal LNB also shows the Polarity. If the cursor frequency is adjusted to a position
that would be offscreen, the screen is cleared and the spectrum plotted with the cursor
at the new frequency in the centre. The current frequency is used for other modes, so the
Spectrum Mode can be used to find a signal of interest, and then the Digital Mode can
be used for more complete examination. The user can exit Spectrum Mode by pressing
the button.
Accessing the Spectrum Menu
The Menu is activated by pressing the button. At this time, the Spectrum options can be
changed or other functions in the menu can be used.
13