Appendix H - Satlook Hd Specifications - emitor Satlook Micro G2 Manuel D'utilisation

Appendix H – Satlook HD Specifications
• Automatically acquires DVB-S and DVB-S2 transponders using advanced
demodulator to determine FEC and Symbol Rate.
• Input frequency: 920-2150MHz
• Input level: 35-100 dBuV
• Input/output impedance: 75 Ohm, F-connectors
• Measuring method (Analog):
RF Signal presentation in thermometer scales for both LNB inputs
Loadspeaker tone changes with signal level when enabled
• Spectrum Analyzer 950 MHz to 2150 MHz, step size 1 MHz to 10 MHz
• Measuring method (Digital):
BER (bit error rate)
MER (modulation error ratio)
SNR (signal/noise-ratio)
Constellation (QPSK and 8PSK)
• Max-level: - Thermometer scales showing max
• Maxhold function with BER, SNR and MER showing maximum values
• Satellite identification: By reading the NIT in the transport stream
• Channel Information: reading the SDT showing TV and Radio channels available
• Memory: 100 transponders can be stored with name
• Memory locks on: FEC, Symbol-rate Frequency, 13V/18v, 22kHz
• Display: LCD 3 inch display
• PC connection: RS232 with DB9 connector
• LNB Power: 13V or 18V supplied on both LNB-A and LNB-B
• 22 kHz tone: Standard 22 KHz signal superimposed at 0.65V p-p on LNB-A
• DiSEqC: Yes, all 1.0 and 1.1 commands supported
• DiSEqC: Positioner commands for DiSEqC 1.2 and GoToX
• Battery: Rechargeable 12v, 1.8 amp/hour
• Battery Life: About 2 hour on a fully charged battery
• Weight: About 1.5 kg including battery
• Accessories: Nylon carrying case
• Power-supply of 220v/13.8v, 1.5 amp
• Car-charger
35