Weka HD16 Notice D'utilisation page 20

authorized repair station (www.weka-elektrowerkzeuge.de).
7.1 Oil-bath lubrication
After the first 100 hours of using the machine you should replace the gear system´s oil. Get this done in
a specialist´s workshop or demand on the appropriate technical documents for this work.
ATTENTION: If oil comes out of the machine, stop working with it immediately. Leakage of oil does
damage the gear system.
8. G U A R A N T E E
This product is covered by a guarantee for a period of 12 months from the date of purchase.
The guarantee covers all defects or damages of the product during the guarantee period evidently due
the defaults in workmanship or material and is limited to repair and/or adjustment. The guarantee is not
valid in case of normally wear and tear, if the product has been misused, used contrary to the instruction
manual, or by using extraneous parts.
9. D E C L A R A T I O N O F C O N F O R M I T Y
Description:
Type:
from serial no.:
We hereby declare under our sole responsibility that this product conforms with the following standards:
EN60745-1, EN60745-2-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3 in accordance to the
regulations of directive 2006/42/EG, 2014/30/EU, 2011/65/EU
WEKA Elektrowerkzeuge
Auf der Höhe 20
D 75387 Neubulach
10. R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling. Please make sure that the old tool does not
get into the unsorted municipal solid waste, but that it is given back to us, resp. abroad to our
distributors.
Diamond core drill - for drilling holes in concrete, stone and masonry
HD16, HD18 (and versions)
0115001
Neubulach, 13.01.2015
Wilhelm Wurster, Owner
Original instructions - Subject to change without notice 0917
17