whilst charging between
shots, and will be solid green
when ready to shoot.
2. Battery low:
Enough charge for about
1 pack of film.
The flash LED will blink orange
whilst charging between
shots, and will be solid orange
when ready to shoot.
3. Battery empty:
No charge remaining.
The flash led will blink red,
and the camera will cease to
operate until it is recharged.
A fully-charged OneStep+
camera will have enough
power to shoot 15-20 packs of
film, depending on usage.
Checking your camera's charge
To check the camera's charge
at any time, switch the camera
off, then switch it back on
whilst holding down the Plus
button. The 8 film counter
LEDs on top of the camera will
light up, indicating how much
battery remains.
For example: If 6 LEDs light
up, that means the camera has
6/8 (75%) charge remaining.
Once you release the Plus
button, the LEDs will return to
displaying the number of shots
remaining in your film pack.
Compatible Film
The OneStep+ works with
all Polaroid Originals i-Type
and 600 type film packs. We
recommend using i-Type film
as it is optimized for use with
the OneStep+.
Power supply
Charge the OneStep+ before
use to ensure it has enough
power for the duration of your
shoot (see →Charge the Cam-
era). The flash charge LED will
be solid red whilst the camera
is plugged in and charging,
and will turn off once the
camera is fully charged.
Attach the camera neck strap
See page 8 for guide to
attaching your neck strap.
Using a Tripod
The OneStep+ has a tripod
socket in its base, which
works with most standard