Zwilling ENFINIGY MILK FROTHER Manuel D'utilisation page 17

EN
3 Heating milk / prepping hot chocolate or instant drinks
Put all the ingredients into the stainless steel container, fill the container with max. 400 ml of liquid
("MAX" marking must be observed). Fit the lid with the whisk and plug the mains plug into the
socket. Turn the rotary button anti-clockwise
drink. Then press the ZWILLING logo
switches off automatically after preparation. To stop the preparation prematurely, press the
ZWILLING logo again
Note the upper MAX
mark in the device.
Never fill liquids into the
base station.
4 Removing the prepared drink
After preparation, remove the stainless steel container from the base station using only the han-
dle. Before pouring, pull off the lid upwards. Always rinse the stainless steel container with clear
water and a gentle detergent after use.
Caution, risk of burns! The
stainless steel container is
hot after heating up!
www.zwilling.com
to prep a hot drink or clockwise
on the rotary button to start the action. The device
.
1. 1.
2. 2.
max.
400 ml
2. 2.
1. 1.
3. 3.
3. 3.
Operation
for a cold
4.
/
17