Zwilling ENFINIGY MILK FROTHER Manuel D'utilisation page 16

Operation
Operation
1 Getting started / inserting the whisk
1. Rinse out the stainless steel tank with warm water before using it for the first time.
Insert the matching whisk into the whisk holder with the black side facing upwards:
2. Frothing whisk: for frothing milk.
3. Whisk: For heating milk and preparing hot chocolate and instant drinks.
1. 1.
Frothing milk
2
Fill the stainless steel container on the base station with max. 200 ml of milk. Fit the lid with the
frothing whisk and plug the mains plug into the socket. Turn the rotary button anti-clockwise
for hot milk foam or clockwise
rotary button to start the action. The device switches off automatically after preparation. To stop
the preparation prematurely, press the ZWILLING logo again
For frothing, only fill up to
the lower MAX mark
the device. Never fill liquids
into the base station.
16
2. 2.
for cold milk foam. Then press the ZWILLING logo
1. 1. 2. 2.
max.
200 ml
in
3. 3.
.
3. 3.
EN
on the
4.
/