Hendi XENON PRO Mode D'emploi page 6

Assembly
• Remove all protective plastic foil
• Fasten the frame with the already assembled wheels to the under part of the Power grill. Use the parts
delivered; M6x40 bolts and the M6 cap nuts. Take note of the frame stand, the bend in this frame has to
be slightly bent upwards at the ends.
• Assemble the body frame the wheel frame. Take note, the supplied rings has to be positioned in the
inner side of the frame and also where the two frames join together. Use the long M6 x 65 bolts and the
M6 cap nuts.
• Fasten the U-shaped part to the under part of the body frame. Use the star bolt supplied. Check if it's
really tightened.
NL EN
• Put the barbecue in up right position. The barbecue has to be positioned horizontally. If not the wheel
frame has to be turned the other way round.
Warranty
Any defect affecting the functionality of the appliance
that becomes apparent within one year after pur-
chase will be corrected by free repair or replacement
provided the appliance has been used and main-
tained in accordance with the instructions and has
not been abused or misused in any way. Your statuto-
ry rights are not affected. If the appliance is claimed
Discarding & Environment
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
6
under warranty, state where and when it was bought
and include proof of purchase (f.e. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.