Installation And Assembly - Graf UPone 3 EW Notice De Montage

3.3

Installation and assembly

Assembly material bag content
1 Plastic dowels
2 Washer, rubber
3 Washer, steel
4 Hanger bolt M8x10
5 Washer, steel
6 Toothed lock washer
7 Nut M8
8 Screw M4x20 as child safety
lock for the cover
The PP cabinet is mounted using 4 hanger bolts ③ and plastic dowels ① fixed in the wall. Assemble the
washers, toothed lock washers and nuts as illustrated in the above figure.
When mounted, secure the cover using the M4x20 screw. A second screw is included for replacement.
3. Assembly of the control cabinet
Required tools
Drill M10
13 mm open-end wrench
Bit TX25 for hanger bolt
Bit H2 for cabinet cover