Operating Anomalies; Cable Replacement - MGE UPS Systems 5102922200 AA Manuel D'installation

Troubleshooting

Operating anomalies

AC-power problem
The green light 3 on the acquisition card
remains off:
check the supply of power to the MultiSlot
module,
check that the acquisition card is correctly
installed (fully inserted) in the module,
press the reset button 4 on the
acquisition card.
Start-up problem
The green light 3 on the acquisition card
remains on: press the reset button 4 on the
acquisition card.

Cable replacement

If the communications cable supplied with
the acquisition card is lost or damaged, a
cable wired as indicated in figure 7 may be
used.
RS232 cable
male DB9 male DB9
connector connector
Fig. 7
If the problem continues, contact our
after-sales support department.
RS232-cable wiring diagram
1
2
3
4
5
6
7
8
9
body
male DB9 shielded
connector cable
MGE UPS SYSTEMS - 5102922200/AA
1
2
3
4
5
6
7
8
9
body
male DB9
connector
15