Meec tools 018253 Mode D'emploi page 47

TRANSPORT
• Remove the battery from lawn mower before transport.
• Undo the two quick-couplings and fold down the top handle.
• Use the carry handle to transport the lawn mower.
TROUBLESHOOTING
Problem
The product does not
work.
The motor stops when
in use.
Reduced performance.
Heavy vibration.
Inadequate grass
catching.
The lawn is mown
unevenly.
Possible cause
The battery is flat.
The safety catch is defective.
Defective motor.
The safety key is not inserted.
The battery is flat.
The battery is mot correctly
inserted.
The battery is defective.
The battery is flat.
The battery is not fully charged.
The grass is too high.
The blade is not properly fitted.
The blade blocked by a foreign
object.
The blade is damaged.
The grass catcher is full.
The ejector opening is blocked.
The mowing height is set too low.
The blade is blunt.
The grass is too high.
Action
Check the battery. Repairs must
be carried out by an authorised
electrician.
Take the product to an authorised
service centre, or other qualified
personnel, to be checked and
repaired.
Take the product to an authorised
service centre, or other qualified
personnel, to be checked and
repaired.
Insert the safety key.
Charge the battery.
Insert the battery correctly.
Clean the terminals, replace with a
new battery of the same type.
Charge the battery.
Charge the battery.
Cut in steps.
Check the blade.
Unblock the blade.
Replace the blade.
Empty the grass catcher.
Clear the ejector opening.
Adjust to a suitable mowing height.
Sharpen or replace the blade.
Cut in steps.
EN
47