Exit Coppa Mode D'emploi page 6

3.0 Assembly and Installation Instructions
• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs,
and other possible hazards.
• Lateral clearance is essential. Place the Soccer Goal away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the soccer
goal. A minimum of 3m from frame edge is recommended.
• The soccer goal is heavy, two able-bodied adults are required to set it up.
• Never set-up the soccer goal in heavy rain, wind or storm conditions, especially
storms. It is recommended that the soccer goal be taken apart and stored.
• When moving the assembled soccer goal, have at least two people evenly the
frame to lift the soccer goal off the ground.
• Place the soccer goal on a level surface before use.
• Secure the soccer goal against unauthorized and unsupervised use.
4.0 Care and Maintenance Instructions
Inspect the soccer goal before each use and replace any worn, defective, or missing
parts.
The following conditions could present potential hazards:
1. Missing, improperly positioned, or insecurely attached frame padding, barrier or
enclosure
2. Punctures, frays, tears, or holes worn in the soccer goal mesh.
3. A bent or broken frame.
4. Sharp protrusions on the frame or suspension.
5. Loosened or missing hardware, system.
6
Coppa
Soccer goal