Safety Recommendations; Front Panel - Ltc Audio ATM6500BT Manuel D'utilisation

SAFETY RECOMMENDATIONS

Before using the device, please check it for any possible damages. In case of damage do not operate it.
•
• Unplug the UNIT if you do not use it for a certain time.
• Do not expose the unit to mechanical stress and humidity.
Ensure sufficient ventilation around the unit. Do not cover the device and protect it from direct solar radiation.
•
• Clean the device with a dry and soft cloth only.
• Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified service
agent.
• The unit must be connected to an earthed mains outlet only.
• Keep out of the reach of children
DISCONNECT DEVICE
•
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Features
USB/SD card input
•
Spectrum Screen Display
•
• 2x microphone inputs with Echo & Volume control
• FM tuner
• Bluetooth function

Front panel

POWER: Press this button to power ON or OFF the unit
Play/Pause & Scan: Press this button to play the signal from USB/SD, Bluetooth. Press again to pause. In tuner mode,
press this button to scan all the available stations from the lowest frequency to highest frequency.
Previous: Press this button to go back to the beginning of the current track or move to the previous track.
Next: Press this button to move to the next track.
Repeat/Random: Press this button to select the repeat mode between REPEAT ONE, REPEAT ALL, RANDOM. The
default setting is repeat all.
Input: Press this button to cycle through the various inputs.
USB: Connect your USB flash drive here
SD: Connect your SD card here
DELAY: Use this knob to adjust the delay of microphone.
EQ MODE: Press this button to cycle through the pre-set equalizer modes.
©Copyright LOTRONIC 2018
GB
ATM6500BT 2