Scope Of Delivery; Safety Information - VOLTCRAFT ECB-1000P Mode D'emploi

4. Scope of Delivery

• Temperature controller
• NTC temperature sensor (cable length approx. 2 m)
• 1x shrink hose
• 1x cable clip
• 3x rubber sealing rings
• 3x cable feedthrough (2x large, 1x small)
• Operating instructions
Current operating instructions:
Download the current operating instructions via the link www.conrad.com/downloads or scan the QR code displayed.
Observe the instructions on the website.

5. Safety Information

Read the entire operating instructions first; they contain important information for correct assembly
and operation.
The guarantee/warranty will expire if damage is incurred resulting from non-compliance with the
operating instructions! We do not assume any liability for consequential damage!
Caution, important note!
Installation only by persons with relevant electrotechnical knowledge and experience! *)
Improper installation endangers:
• your own life
• the lives of the users of the electrical system.
Improper installation risks severe property damage, e.g. from fire.
You threaten to incur personal liability in case of injury and property damage.
Contact an electrical installer!
*) Required specialist knowledge for the installation:
Especially the following specialist knowledge is required for installation:
• The "5 safety rules" to be applied: Power down; secure against reactivation; confirm freeness from volt-
age; earth and short-circuit; cover off or barrier off adjacent live parts
• Selection of the proper tools, the meters and poss. personal protection equipment
• Evaluation of the measuring results
• Selection of the electrical installation material to ensure the deactivation conditions
23