Connecting The Luminaire To The Mains Voltage; Connecting The Luminaire To The 24 V Supply Voltage (Selv) - Waldmann TEVISIO Mode D'emploi

Connection
5.2 Connecting the luminaire to
the mains voltage
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and
make sure that they are identical.
X Connect the connecting cable to the
power supply unit.
X Plug the mains plug into a socket.
5.3 Connecting the luminaire
to the 24 V supply voltage
(SELV)
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Connection by a skilled electrician
only.
X Operate the luminaire at safety
extra low voltage (SELV) only.
X USA and Canada: This device
must be connected to a class 2
power supply.
2
No. Designation
1 DC +
2
DC −
3
Not connected
Tab. 2: Pin assignment.
NOTE: Please observe the pin assignment.
X Plug the plug into the socket provided
for this purpose.
ENG
1
3
25