The Heat Setting; Bridge Function; Automatic Heat Up; Power Function - Electrolux Notice D'utilisation

time comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 3
4 - 7
8 - 9
10 - 14

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
4.4 Cooking zone indication
The horizontal line shows the maximum
size of the cookware.
max.
Refer to "Technical information" chapter.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour

4.5 Bridge function

This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch
. The cooking zones operate
independently.

4.6 Automatic Heat Up

Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch (
Immediately touch the correct heat
setting. After 3 seconds
To deactivate the function: change the
heat setting.

4.7 Power function

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch .
To deactivate the function: change the
heat setting.
ENGLISH
/ . To set or
/
comes on).
comes on.
comes on.
9