Auto Power Off; Battery And Fuse Replacement; Accessories - Mercury 600.219 Mode D'emploi

TEMPERATURE MEASUREMENT (For 600.219 only)
1) Insert the K type probe to the temperature jack.
2) Set the Function / Range switch to the "ºC" range.
3) Connect the K type probe to the object to be measured.
4) Read Temperature value in displayed on the LCD.
AUTO POWER-OFF
The function of auto power-off extends the life of the battery by
turning the meter off if the range switch has not been operated for
about 15 minutes. To turn the meter on again, just rotate the range
switch or press the power switch.

BATTERY AND FUSE REPLACEMENT

If " " appears on the LCD, it indicates that the battery should be
replaced. To replace battery, open the case, and replace the
exhausted battery with the ratings specified: 9V, NEDA 1604 or
6F22, and then close the case.
Fuse rarely needs replacement and is blown as a result of the
operator's error. To replace the fuse, open the case, and replace
the blown fuse with the ratings specified: F 250mA/250V (600.219)
F 2A/250V (600.524) and then close the case.

ACCESSORIES

•
Users Manual: 1 copy
•
Test leads: 1 pair
•
9V Battery (NEDA 1604 or 6F22): 1 piece
•
K type thermocouple (only for 600.219): 1 piece