Changing The Display Information; Using The Remote Controller (Rm-Rk252) - JVC KW-AVX820 Mode D'emploi

Changing the display
information
• Available display information varies among the
playback sources.
• Each time you press DISP, the display changes to
show the various information.
Ex.: When the playback source is a DVD video disc.
Back to the beginning
* 1
• When the source is " USB-iPod", the Artwork of
the song is shown if the song has an Artwork data.
( )
16
• While MP3/WMA/AAC file is played, "Jacket
picture" is shown if the file has the tag data
including "Jacket picture."
* 2
When <Navigation> is selected for <AV Input>
( )
18
Using the remote controller
(RM-RK252)
Installing the batteries
Playback picture
screen
(only for video
sources)
Insert the batteries into the remote controller by
matching the polarity (+ and –) correctly.
Source information
Caution:
screen
• Danger of explosion if battery is incorrectly replaced.
• Battery shall not be exposed to excessive heat such as
1
*
Playback picture
and clock time in large
If the effectiveness of the remote controller
numbers
decreases, replace the batteries.
Before using the remote controller:
• Aim the remote controller directly at the remote
* 2
Navigation screen
• DO NOT expose the remote sensor to bright light
Replace only with the same or equivalent type.
sunshine, fire, or the like.
sensor on the unit.
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
INTRODUCTIONS
R03/LR03/AAA
Continued on the next page
9