Usb Operations - JVC KW-AVX820 Mode D'emploi

USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod/iPhone to the USB terminal of the unit. For details of the operations,
The source changes to "USB" and playback starts.
This unit can play JPEG/MPEG1/MPEG2 *
2
WAV/AAC * files stored in USB mass storage class
device.
• You can operate the USB device in the same way you
operate the files on discs. (
• All tracks in the USB device will be played repeatedly
until you change the source.
* 1
Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
* 2
This unit can play back AAC fi les encoded using
iTunes. This unit cannot play back FairPlay-encrypted
fi les.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while "Now Reading" is shown on the screen.
• Do not start the car engine if a USB device is
connected.
40
USB cable from the rear of the unit
1
/MP3/WMA/
31 – 36)
• Stop playback before disconnecting a USB device.
• Electrostatic shock at connecting a USB device may
cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and the
USB device.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations,
48.
55.