Mi-T-M Corporation GEN-2000-iMM0/0DM0 Guide D'utilisation page 32

MAINTENANCE SCHEDULE
CLEANING AND GAPPING SPARK PLUG:
If the plug is contaminated with carbon, remove the carbon
using a plug cleaner or wire brush. (Fig. 24 and 25)
Adjust the electrode gap to 0.6 to 0.7 mm (0.024 to
0.028 in). (Fig. 26)
Torque: 12.5 N*m, (1.25 kgf*m, 9lbf*ft)
Recommended Spark Plug:
NGK PART#
CR5HS
32
Service
NGK STOCK #
2874
Spark Plug Cap
Cap
(Fig. 24)
Handlebar
(Fig. 25)
0.024 - 0.028 in
(Fig. 26)
Tool
Operator's Manual