Bosch 4100 Consignes D'utilisation page 12

2610048783.qxp_4100 11/17/17 9:10 AM Page 12
15. HEX WRENCH
Hex wrench for removing the blade guard and ad-
justing various hex heads on saw.
16. CORD WRAp
Allows you to easily secure the cord so it's out of
the way when transporting or storing.
17. VACUUM HOOK-Up
Your table saw is equipped for vacuum hook-up.
This feature will allow you to attach any 2-1/4"
vacuum hose into the dust port provided for con-
venient sawdust removal. An adaptor is available
for use with alternate hose sizes.
18. RIp FENCE
Exclusive Self-Aligning, Squarelock rip fence can
be easily moved or locked in place by simply rais-
ing or lowering lock handle.
19. SMART GUARD SYSTEM
Consists of three key elements: Adjustable (3 po-
sition) Riving Knife, Anti-Kickback Device, and
Barrier Guard Device. All of these are part of a
modular system that requires no tools to assem-
Fig. 2
12
Getting To Know Your Table Saw
20
15
14
ble or unassemble. This Guard System must al-
ways be in place and working properly for all
thru-sawing cuts.
20. SMART GUARD SYSTEM STORAGE
When not in use, the Main Barrier Guard and Anti-
Kickback Device can be stored under the right
side table extension.
21. TABlE INSERT
Removable for removing or installing blade or
other cutting tools.
22. pUSH STICK
Allows you to rip smaller pieces of stock with a
greater level of safety.
23. pUSH STICK HOlDER
Securely stores push stick when not in use.
24. MOUNTING HOlES
Used to secure the saw to a work stand or bench.
22
17
16
11
23
24