Receiver volume
The receiver volume can be set to one of five different volume levels. The volume can
also be adjusted according to needs during a call (refer to Page 138).
- or .
Flash time
67
As already mentioned in Chapter 6, various Flash times are available for selection. The
R button on the handset can be assigned the following Flash times:
5 (100 ms) or L
3 sec P 5 or L
Tone or pulse dialling modes
This feature enables the telephone to be operated in analogue exchanges (PULSE) as
well as in a new, digital exchanges (DTMF/TONE). Tone dialling is the default setting set
at the factory.
Select the setting []
3 sec R []
or P
Setting Up the Telephone
(300 ms)
68
(TONE) or P
(PULSE).
Activate programming mode
Select the volume
Select the Flash time
Select the dialling mode required
147