How To Assemble; Connect Hose; Connect Wand; Connect Nozzle - Hoover Platinum Collection Guide D'utilisation

3. HOW TO ASSEMBLE

Co nnect Hose
3.1
Push Hose Connector end (A) into opening
(B) on front of cleaner. To disconnect hose
from cleaner, press release buttons (C) on
sides of Hose Connector and pull out.
NOTE:
The flexible hose contains electrical wires
for connection to the Power Nozzle and should
not be used if damaged, cut or punctured.
Co nnect Wand
3.2
Push Hand Grip (D) firmly into end of Wand
(E) until Latch clicks. To remove Wand from
Hose, press on Wand Releases Button (F) on
end of Wand and pull apart.
Co nnect Nozzle
3.3
Push the opposite end of Wand (G) firmly into
Power Nozzle.
To Release, step on Wand Release Pedal (H)
and pull to disconnect from nozzle.
3.1
C
3.3
G
H
3.2
B
D
A
E
F
7