Rear Panel Las-7; Rear Panel Las-8; Installation - EuroLite LAS-7 Mode D'emploi

4.4 Rear panel LAS-7

4.5 Rear panel LAS-8:

5. INSTALLATION

This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
Please note: Please define the audience area and the showlaser area before choosing the installation-spot.
The device has to be installed out of the reach of people.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
(10) Power supply
(11) Power switch
(12) Auto Speed control
(13) Music selector
(14) Manual Speed control
(10) Power supply
(11) Power switch
(12) Music selector
(13) Selector
(14) Manual Speed control
23/49 51741140_V_1_0.DOC