for_q FQ-AKS 4030 Mode D'emploi page 168

i. Ensure that all guards and han-
dles are fitted before using the
unit. Never attempt to switch on
an incompletely assembled unit
or a unit which has unauthorised
modifications.
j. Operate the unit only in the tech-
nical condition stipulated and
delivered by the manufacturer.
Unauthorised changes to the unit
exclude liability of the manufactur-
er for any resulting damage and/or
injury.
k. Spare parts must conform with
the requirements specified by the
manufacturer. Therefore use origi-
nal spare parts only or spare parts
authorised by the manufacturer.
When replacing parts, please fol-
low the supplied installation in-
structions and remove the battery
beforehand.
l. Have repairs carried out exclu-
sively by a qualified technician or
a service centre.
EN
168
10 ADDITIONAL SAFETY INSTRUC-
TIONS ON RISKS DUE TO VIBRA-
TION
a) The declared vibration data repre-
sents the main applications of the
tool, but different uses of the tool
or poor maintenance can result in
different vibration data. This may
significantly increase the vibration
level over the total working period.
b) Additional safety measure shall
be taken to protect the user from
effects of vibration. Maintain the
tool and its accessories, keep
hands warm and organize work
patterns and periods.
For safety instructions for the bat-
tery charger please refer to the man-
ual of the charger.
For safety instructions for Li-ion bat-
teries please refer to the manual of
the battery.