Dörr ML-2020 LED Notice D'utilisation page 6

04 | NOMENCLATURE
3
1
05 | ASSEMBLY
CAUTION Open and close the snap fasteners (1) carefully – do not tear open!
06 | OPERATION
1. Turn on your PC and wait until system is booted completely.
2. Insert the two USB 2.0 Micro B plugs (4a) into the Micro USB ports of the LED stripes (2).
In order to achieve light effects, connect only one plug, so that either the front or only the rear LED stripe will light up.
3. Connect the USB 2.0 plug A (4b) with a vacant USB port on your PC.
When connection is made correctly the LED stripes will light up.
2 5
3
1
4
4a
4b
06
6
1 Snap fastener
LED stripes with Micro USB port
2
3 Suspensions for background
4 USB 2.0 Y cord with
2x USB 2.0 plug Micro B
4a)
4b) 1x USB 2.0 plug A
5 Foam rubber backgrounds with suspension
6 Bag
Hang up the rubber background